Video Filter (when Auto Adjust is off) | Factory Default |
This function reduces video noise.
Select On/Off with the Select or button.
On | The |
Off | The filter is removed. |
Screen adjustments are possible even when the filter is On.
Overscan (RGB only)
You can select overscan percentage for RGB signal.
Select the appropriate option using the Select or button.
NOTE: When "Resolution" is set to "Native", this feature is not available, and the stored settings and adjustments are invalid.
Clamp Timing (not available for DVI digital)
This function sets the standard black level position of the displayed image. Select one of the following three options.
Auto | Normal setting. |
Setting for HDTV signal | |
Front Porch .. | For other settings than above |
Y/C Delay (not available for RGB and DVI digital)
Adjusts Y/C delay level (
YTR Adjustmen (not available for RGB and DVI digital)
Adjusts luminance transient time
CTR Adjustment (not available for RGB and DVI digital)
Adjusts chroma transient time
HD Delay (available for DVI digital signal only)
This feature is used to correct vertical jitter of DVI digital signal. Select On/Off with the Select or button.
On | Delays the horizontal sync. |
Off | Does not delay the horizontal sync. |
Changes all adjustments and setting to the factory preset for each source individually except Lamp Hour Meter, Projector Usage, Lan- guage and Communication Speed. (To reset the lamp usage time, see "Clear Lamp Hour Meter" on page
All Data | Reset all the settings for all the signals to the factory |
| preset. |
Current Signal | Resets the adjustments for the current signal to the fac- |
| tory preset levels. |
The items that can be reset for the currently projected image are: Picture (Brightness, Contrast, Color, Hue and Sharpness) and Image Options (Color Temperature, Gamma Correction, Advanced Options [Aspect Ratio, Noise Reduction, Color Matrix, White Balance, Switcher Gain, Position/Clock, Resolution, Video Filter, Overscan, Clamp Tim- ing, Y/C Delay, YTR Adjustment, CTR Adjustment and HD Delay] ).
NOTE: The Volume, Keystone, Lamp Mode and all the items in the Projector Options can be reset only when "All Data" is selected.
Projector Options
Enables you to set preferences and other operating options.
Timer
Enables you to turn on or off your projector automatically at a specified time. Two timer functions are available: On/Off Timer and Sleep Timer.
[On/Off Timer]
Up to eight settings can be programmed.
•Before setting On/Off Timer, make sure that Date, Time Preset fea- ture is set.
•Even after setting On/Off Timer, turning the projector on or off with the remote control is possible.
•There are two time display formats:
E – 44