NEC LCD2190UXi user manual Level, Ntaa SW

Advanced OSM Controls – continued

Tag 3

AUTO ADJUST	Determines which items are to be adjusted when the AUTO
LEVEL	ADJUST function is activated.
(Analog input only)	The choices are “SIMPLE” “FULL”, and “DETAIL”.
	Press ”Left” or “Right” to select.
		Size, Fine,	Contrast	Black Level, Long	Time
		Position		Cable capability**
	SIMPLE	O	X	X	1 Sec.
	FULL	O	O	X	1.5 Sec.
	DETAIL*	O	O	O	5 Sec.

O:Automatic Adjustment X: No Automatic Adjustment

* “DETAIL” activates automatic long cable (skew, peaking) adjustment.

**Black level, RGB sharpness, RGB delay and RGB position can be adjusted using the Long Cable Software. To download the software, please visit www.necdisplay.com.

A-NTAA SW	The Advanced No Touch Auto Adjust function is able to recog-
(Analog input only)	nize new signals even when neither the resolution nor the refresh
	rate has changed. If several PCs are connected to the monitor,
	and each transmit very similar (or even the same) signals in terms
	of resolution and refresh rates, the monitor recognizes that there
	is a new signal and automatically optimizes the picture without
	the need for any action on the part of the user.
	OFF: A-NTAA is disabled.
	ON: If a change in signal is detected A-NTAA will adjust the
	monitor to the optimal settings for the new signal. If no change in
	the signal is detected then A-NTAA does not activate. The screen
	will be blank while the monitor optimizes the signal.
	OPTION: Functions the same as ON, except that the screen does
	not go blank when the monitor makes adjustments for changes
	in signal, allowing the monitor to display the new signal faster.
	When using an external switching device to connect 2 or more
	PCs to the monitor,using either the ON or OPTION setting is
	suitable.

18