NEC LCD2190UXi user manual DVI Selection, Video Detect, OFF Timer, Ipm, IPM Setting, Over Drive

Advanced OSM Controls – continued

Tag 7

SHARPNESS	This function is digitally capable of keeping an image crisp at
	any resolution at any time. This setting can be set independently
	for different signal timings (resolution settings).
DVI SELECTION	This function selects the DVI input mode. If the DVI selection
	changes, you must restart your computer.
	AUTO: When using the DVI-D to DVI-D cable, the DVI SELEC-
	TION is DIGITAL.
	When using the D-SUB to DVI-A cable, the DVI SELECTION
	is ANALOG.
	DIGITAL: DVI digital input is available.
	ANALOG: DVI analog input is available.
VIDEO DETECT	Selects the method of video detection when more than one
	video input is connected.
	FIRST: If “FIRST” is selected as the VIDEO DETECT option, the
	monitor displays the signal from the first input port. If there is no
	signal present at the first input port, then the monitor will search
	for a signal from the next input port.
	If a new input signal is connected to another of the monitor’s
	input ports while the monitor is in FIRST mode, the monitor will
	not switch automatically to the new source.
	LAST: If “LAST” is selected as the VIDEO DETECT option, then
	each time a new input source is detected, the monitor automati-
	cally displays the new signal.
	NONE: The monitor will only search other input ports while the
	power is on.
OFF TIMER	Monitor will automatically power off after a user-determined length
	of time passes. Before powering off, a message will appear on
	the screen asking the user if they want to delay the turn off time
	by 60 minutes. Press any OSM button to delay the turn off time.
IPM	The Intelligent Power Manager allows the monitor to enter into
(Intelligent Power	a power saving mode after a period of inactivity. The IPM has
Manager)	three settings.
	OFF: Monitor does not go into power save mode when the
	input signal is lost.
	STANDARD: Monitor enters power save mode automatically
	when the input signal is lost.
	OPTION: Monitor enters power save mode automatically when
	the amount of surrounding light goes below the level that is
	determined by the user.
IPM SETTING	Adjusts the luminance value for IPM.
OVER DRIVE	Turns the OVER DRIVE function ON or OFF. Over Drive may
	reduce blurring that occurs in some moving images. When
	Over Drive is on, response time is improved.
	When the IMAGE ROTATION function is used, the OVER DRIVE
	function will be turned off automatically.

21