NEC LCD2190UXi user manual Using the CableComp function, CableComp Adjustment

Using the CableComp™ function

CableComp Adjustment

CableComp allows the monitor to correct slight variations in the image that may occur when using a long signal cable.

To perform the long cable compensation adjustment, use the following steps: Set the Auto Adjust Level to “DETAIL” in the Advanced OSM Control menu (see page 18).

	"Size" "Fine"	"Contrast"	Black Level,	Time
	"Position"		Long cable capability *1
SIMPLE	O	X	X	1 seconds
FULL	O	O	X	1.5 seconds
DETAIL	O	O	O	5 seconds

O: Automatic adjustment is performed.

X: Automatic adjustment is not performed.

*1: Black level, RGB sharpness, RGB delay and RGB position can be adjusted using the Long Cable Software. To download the software, please visit www.necdisplay.com.

To enter the Advanced OSM

•Turn off your monitor.

•Turn on your monitor by pressing the “POWER” and “SELECT” buttons simultaneously.

•Press one of the following OSM buttons to enter the Advanced OSM Control menu: EXIT, LEFT, RIGHT, UP, or DOWN.

To exit the Advanced OSM Control Menu

• Turn off and restart your monitor.

Perform “AUTO ADJUST” by using the OSM function.

•Press select to adjust.

•For additional information on user controls and software utilities, visit our website at www.necdisplay.com.

29