Advanced OSM Controls – continued
Tag 4
H. POSITION | Sets Horizontal Image Position within the display area of the |
| LCD. Press “Left” or “Right” to adjust. |
|
|
V. POSITION | Sets Vertical Image Position within the display area of the LCD. |
| Press “Left” or “Right” to adjust. |
H. SIZE | Increases or decreases the horizontal (or vertical) size. |
(Analog input only) | If the “Auto Adjust function” does not give a satisfactory picture, |
| further tuning can be performed manually using the “H. Size (or |
| V. Size)” function (dot clock). |
| To manually adjust the monitor, a Moiré test pattern should be |
| used. |
| This function may alter the width of the picture. Use Left/Right |
| Menu to center the image on the screen. |
| (see page 11). |
FINE | If the “Auto Adjust” and the “H.Size” functions do not give a |
(Analog input only) | satisfactory picture, further tuning can be performed using the |
| “Fine” function. Increasing or decreasing this setting improves |
| focus, clarity and image stability. |
| (see page 11) |
AUTO FINE | This function automatically and periodically adjusts the “FINE” |
(Analog input only) | setting for when there is a change in the input signal. |
| Adjustment occurs approximately every 33 minutes or when a |
| change in signal timing is detected. |
H. RESOLUTION | Adjusts the Horizontal resolution. |
| Press “Left” or “Right” to adjust. |
V. RESOLUTION | Adjusts the Vertical resolution. |
| Press “Left” or “Right” to adjust. |
EXPANSION | Selects the zoom mode. |
| FULL: The image expands to 1600 x 1200, regardless of the |
| resolution. |
| ASPECT: The image expands without changing the aspect ratio. |
| OFF: The image is not expanded. |
| CUSTOM: When CUSTOM is selected as the Expansion mode, |
| it becomes possible to adjust the H. ZOOM., V. ZOOM, and |
| ZOOM POS. |
H.ZOOM | The image is expanded from 1 to 3 times in the horizontal |
Available in Custom | (H. EXPANSION) direction by 0.01 increments. |
Expansion mode only |
|
V.ZOOM | The image is expanded from 1 to 3 times in the vertical |
Available in Custom | (V. EXPANSION) direction by 0.01 increments. |
Expansion mode only |
|
ZOOM POS. | Sets the point from which the screen will be expanded when ei- |
Available in Custom | ther H.ZOOM or V.ZOOM is selected as the expansion method. |
Expansion mode only | Options are CENTER and LEFT TOP. |
| |
| CENTER: H.ZOOM expands the image from the center out- |
| ward to the sides of the screen. V.ZOOM expands the image |
| from the center towards the top and bottom of the screen. |
| LEFTTOP: LEFTTOP indicates the set point for image expansion |
| (LEFT in H.ZOOM, TOP in V. ZOOM). If the resolution does not |
| fill out the screen, when expanding, the image will not expand |
| past the TOP or the LEFT of the screen. Theimage can be ex- |
| panded past the right and bottom edges of the screen. |
19
