NEC LCD2190UXi OSM Lockout, SEL, HOT KEY BRIGHTNESS/CONTRAST ECO Mode, Osm, Signal, Information

Advanced OSM Controls – continued

Tag 8	OSM LOCKOUT	2: OSM LOCK OUT with no control: This mode prevents access
continued	continued	to all OSM functions. To activate, press the SELECT and
		“Right” buttons simultaneously. To deactivate, press the SELECT
		and “Right” buttons simultaneously, while in the OSM menu.
		3: OSM LOCK OUT with BRIGHTNESS (only) control: This
		mode locks all OSM functions except for BRIGHTNESS.
		To activate, press the SELECT, “Left” and “Down” buttons
		simultaneously, while in the OSM menu.
		To deactivate, press SELECT, “Left” and “Down” buttons
		simultaneously, while in the OSM menu.
		4: CUSTOM: Press RESET and EXIT to enter the CUSTOM
		Menu. Select ENABLE or DISABLE for: POWER KEY, INPUT
		SEL, HOT KEY (BRIGHTNESS/CONTRAST) ECO MODE,
		WARNING (RESOLUTION NOTIFIER/OSM LOCK OUT).
		To Deactivate the OSM Lock Out function, press RESET and
		EXIT to bring up the LOCK OUT warning. Press SELECT,
		SELECT, <, >, <, >, EXIT.
	OSM	Adjusts the transparency of the OSM MENU.
	TRANSPARENCY
	OSM COLOR	“Tag window frame color”, “Item select color”& ”Adjust Win-
		dow frame color” can be changed.
	SIGNAL	Signal information can be displayed in the corner of the screen.
	INFORMATION	Signal information is either “ON/OFF”.
	RESOLUTION	The Resolution Notifier warns the user if the input to the monitor
	NOTIFIER	is set to something other than the optimized resolution of
		1600 x 1200. If the monitor detects a signal that is not at the
		optimized resolution, after 30 seconds a warning message will
		appear on the screen. The Resolution Notifier is set to ON by
		default.
	HOT KEY	When this function is activated, the brightness and contrast of
		the monitor can be adjusted by using the front buttons without
		entering the OSM menu.
		The “Left” or “Right” buttons adjust the brightness level.
		The “Down” or “Up” buttons adjust the contrast level.
	FACTORY PRESET	Selecting the factory preset allows the user to reset most of the
		OSM control settings back to the factory settings.
		Individual settings can be reset by highlighting the control need-
		ing to be reset, and pressing the RESET button.
Tag 9	GRAYSCALE	This mode changes the display’s screen image from color to
	MODE	grayscale.
		There are 3 settings for monochrome mode.
		OFF: The display’s screen image is normal.
		MODE1: The monitor uses only the Green component of the
		RGB color input signal to display grayscale.
		MODE2: The monitor converts the RGB color input signal to
		YUV to display the image as grayscale.

23