NEC LCD2190UXi user manual Controls the brightness of the LED on the front, Monitor

Advanced OSM Controls – continued

Tag 7	SIDE BORDER	Adjusts the side black bars color between black and white.
continued	COLOR	For wide aspect monitors.

	LED BRIGHTNESS	Controls the brightness of the LED on the front of the
		monitor.
	LED COLOR	The LED on the front can be blue or green.
	COLORCOMP	This function electronically compensates for the slight variations
		in the white uniformity level as well as for deviations slight
		differences in color that may occur throughout the display area
		of the screen. These variations are characteristic of LCD panel
		technology. This function improves the color and evens out the
		luminance uniformity of the display.
		NOTE: Using the COLORCOMP feature does reduce the
		overall peak luminance of the display. If greater luminance
		is desired over the uniform performance of the display, then
		COLORCOMP should be turned off.
	COLORCOMP	Select the level for ColorComp adjustments.
	LEVEL
Tag 8	LANGUAGE	OSM control menus are available in eight languages. Press
		“Left” or “Right” to select.
	OSM H.POSITION	You can choose where you would like the OSM control image
		to appear on your screen. Selecting OSM Position allows you
		to manually adjust the location of the OSM control menu left, or
		right.
	OSM V.POSITION	You can choose where you would like the OSM control image
		to appear on your screen. Selecting OSM Position allows you
		to manually adjust the location of the OSM control menu up, or
		down.
	OSM TURN OFF	The OSM control menu will stay on as long as it is in use.
		You can select how long the monitor waits after the last touch of
		a button to shut off the OSM control menu. The preset choices
		are 10-120 seconds by 5 seconds increments. Press “Left” or
		“Right” to select.
	OSM LOCK OUT	This control completely locks out access to all OSM control
		functions. When attempting to activate OSM controls while in
		the Lock Out mode, a screen will appear indicating the OSM
		controls are locked out.
		There are four ways to use OSM LOCK OUT function:
		1: OSM LOCK OUT with BRIGHTNESS and CONTRAST
		control: This mode locks all OSM functions except for
		BRIGHTNESS and CONTRAST.
		To activate, press the SELECT and “Up” buttons
		simultaneously, while in the OSM menu.
		To deactivate, press the SELECT and “Up” buttons
		simultaneously, while in the OSM menu.

22