Quick Start – continued
Figure 4
30 Tilt
Highest
Stand
Position
Figure 5
Power cord
Figure 6
(DC out for optional NEC products such as the Soundbar attachment. Do not use this connector unless specified.)
Make sure to leave enough slack in the cables so that the Tilt and the Raise and Lower functions of the monitor are not impeded.
6.Hold all of the cables firmly and place the cable cover onto the stand (Figure 8).
7.Slide the Cable Cover back into its correct position (Figure 9). Connect the power cord to power outlet.
NOTE: Please refer to the Recommended Use section of this manual for proper selection of power cord.
8.The vacation switch on the left side of the monitor must be in the ON position for the monitor to function (Figure 10).
Turn on the monitor using the front power button, then turn on the computer.
NOTE: The Vacation Switch is a true on/off switch. If this switch is in the OFF position, the monitor cannot be turned on using the front button.
DO NOT turn the vacation switch ON/OFF repeatedly.
9.For Analog input only: Upon initial setup, the
For further adjustments, refer to the Controls section of this User’s Manual for a full description of the OSM controls.
For download information on the Windows® 95/98/Me/2000/XP INF file for your monitor, visit www.necdisplay.com/support.
NOTE: If you have any problems, please refer to the Troubleshooting section of this User’s Manual.
4
