On the BBI, choose System Settings > Remote User Administration to configure the RADIUS server or the TACACS+ server.
The following table describes the configuration.
Table 10 Remote User Administration
Command | Description |
Radius |
|
Radius disable/enable | Enables or disables the Radius server. |
Port | Configures the number of the UDP port to be configured, between 1500 - 3000. |
| The default is 1645. |
Radius Primary Server | Configures the primary Radius server address. |
Radius Secret for Primary Server | Defines the shared secret (up to 32 characters) between the switch and the |
| RADIUS server(s). |
Radius Secondary Server | Configures the secondary Radius server address. |
Radius Secret for Secondary Server | Defines the secondary shared secret (up to 32 characters) between the switch |
| and the Radius server(s). |
Tacacs+ |
|
Tacacs+ disable/enable | Enables or disables the Tacacs+ server. |
Port | Configures the number of the TCP port to be configured, between 1 and |
| 65000. The default is 49. |
Tacacs+ Primary Server | Configures the primary TACACS+ server address. |
Tacacs+ Secret for Primary Server | Configures the shared secret (up to 32 characters) between the switch and the |
| TACACS+ server. |
Tacacs+ Secondary Server | Configures the secondary TACACS+ server address. |
Tacacs+ Secret for Secondary Server | Configures the secondary shared secret (up to 32 characters) between the |
| switch and the TACACS+ server. |