HTTPS Access configuration
Command: /cfg/sys/access/https
[https Menu] |
|
access | - Enable/Disable HTTPS Web access |
port | - HTTPS WebServer port number |
generate - Generate | |
certSave | - save HTTPS certificate |
cur | - Display current SSL Web Access configuration |
|
|
The following table describes the HTTPS Access Configuration menu options.
Table 78 HTTPS Access Configuration menu options
Command | Description | |
access enabledisable | Enables or disables BBI access (Web access) using HTTPS. The default value is | |
| disabled. | |
port <TCP port number> | Defines the HTTPS Web server port number. The default is 443. | |
generate | Allows you to generate a certificate to connect to the SSL to be used during the key | |
| exchange. A default certificate is created when HTTPS is enabled for the first time. | |
| The user can create a new certificate defining the information that they want to be | |
| used in the various fields. For example: | |
| • | Country Name (2 letter code) [ ]: JP |
| • | State or Province Name (full name) [ ]: Tokyo |
| • | Locality Name (for example, city) [ ]: Fuchu |
| • | Organization Name (for example, company) [ ]: NEC |
| • | Organizational Unit Name (for example, section) [ ]: SIGMABLADE |
| • | Common Name (for example, user’s name) [ ]: Taro |
| • | Email (for example, email address) [ ]: info@nec.com |
| You must confirm if you want to generate the certificate. It takes approximately | |
| 30 seconds to generate the certificate. Then the switch restarts SSL agent. | |
certSave | Allows the client, or the Web browser, to accept the certificate and save the | |
| certificate to Flash to be used when the switch is rebooted. | |
cur | Displays the current SSL Web Access configuration. | |
Watchdog configuration
Command: /cfg/sys/watchdog
[Watchdog Menu]
interval - Set watchdog timeout interval
enable | - Enable Watchdog | |
disable | - | Disable Watchdog |
cur | - | Display current Watchdog configuration |
The following table describes the HTTPS Access Configuration menu options.
Table 79 Watchdog Configuration menu options
Command | Description |
interval | Sets the watchdog timeout interval. The default is 30 seconds. |
enable | Enables watchdog. The default is enabled. |
disable | Disables watchdog. |
cur | Displays the current Watchdog configuration. |
Command Line Interface 77