NEC N8406-022A Time Services

Time Services

On the BBI, choose System Settings > Time Services to configure the NTP server.

The following table describes the configuration.

Table 11 Time Services

Command	Description
General Settings
Current Date	Configures the system date.
Current Time	Configures the system time using a 24-hour clock format.
Timezone Location	Configures the time zone where the switch resides. You are prompted to select
	your location (continent, country, region) by the timezone wizard. Once a
	region is selected, the switch updates the time to reflect local changes to
	Daylight Savings Time, etc.
Daylight Savings	Disables or enables daylight savings time in the system clock. When enabled,
	the switch will add an extra hour to the system clock so that it is consistent with
	the local clock. By default, this option is disabled.
NTP Settings
Time Services	Enables or disables the NTP synchronization service.
Update Internal (min)	Specifies the interval, that is, how often, in minutes (1-44640), to
	re-synchronize the switch clock with the NTP server.
Primary Server	Configures the IP address of the primary NTP server to which you want to
	synchronize the switch clock.
Secondary Server	Configures the IP address of the secondary NTP server to which you want to
	synchronize the switch clock.

Browser-based interface 21