IP information
Command: /info/l3/ip
Interface information:
1: 47.80.23.243 255.255.254.0 47.80.23.255, vlan 1, up Default gateway information: metric strict
4: 47.80.23.254, vlan 4095, up active
The following interface and default gateway information is displayed:
•Interface number
•IP address
•IP mask
•IP broadcast address
•Operational status
IGMP multicast group information
Command: /info/l3/igmp
[IGMP Multicast | Group Menu] | |
mrouter | - | Show IGMP Snooping Multicast Router Port information |
find | - | Show a single group by IP group address |
vlan | - | Show groups on a single vlan |
port | - | Show groups on a single port |
trunk | - | Show groups on a single trunk |
dump | - | Show all groups |
|
|
|
The following table describes the commands used to display information about IGMP groups learned by the switch.
Table 32 IGMP Multicast Group menu options
Command | Usage |
mrouter | Displays the Multicast Router Menu. |
find <IP address> | Displays a single IGMP multicast group by its IP address. |
vlan | Displays all IGMP multicast groups on a single VLAN. |
port <port number> | Displays all IGMP multicast groups on a single port. |
trunk | Displays all IGMP multicast groups on a single trunk group. |
dump | Displays information for all multicast groups. |
IGMP multicast router port information
Command: /info/l3/igmp/mrouter
[IGMP Multicast Router Menu]
vlan - Show all multicast router ports on a single vlan dump - Show all multicast router ports
The following table describes the commands used to display information about multicast routers learned through IGMP Snooping.
Table 33 IGMP Multicast Router menu options
Command | Usage | |
vlan | Displays information for all multicast groups on a single VLAN. | |
dump |
| Displays information for all multicast groups learned by the switch. |
Command Line Interface 43