System Information Menu
Command: /info/sys
[System Menu] |
|
snmpv3 | - SNMPv3 Information Menu |
general | - Show general system information |
log | - Show last 100 syslog messages |
user | - Show current user status |
dump | - Dump all system information |
|
|
The following table describes the System Information Menu options.
Table 16 System Information Menu options
Command | Usage |
snmpv3 | Displays the SNMP v3 Menu. |
general | Displays system information, including: |
| • System date and time |
| • Switch model name and number |
| • Switch name and location |
| • MAC address of the switch management processor |
| • IP address of IP interface |
| • Hardware version and part number |
| • Software image file and version number |
| • Configuration block name |
log | Displays 100 most recent syslog messages. |
user | Displays the User Access Information Menu. |
dump | Dumps all switch information available from the Information Menu (10K or more, depending on |
| your configuration). |
SNMPv3 Information Menu
Command: /info/sys/snmpv3
[SNMPv3 Information Menu]
usm | - Show usmUser table information |
view | - Show vacmViewTreeFamily table information |
access | - Show vacmAccess table information |
group | - Show vacmSecurityToGroup table information |
comm | - Show community table information |
taddr | - Show targetAddr table information |
tparam | - Show targetParams table information |
notify | - Show notify table information |
dump | - Show all SNMPv3 information |
SNMP version 3 (SNMPv3) is an extensible SNMP Framework that supplements the SNMPv2 Framework by supporting the following:
•a new SNMP message format
•security for messages
•access control
•remote configuration of SNMP parameters
For more details on the SNMPv3 architecture, see RFC2271 to RFC2276.
The following table describes the SNMPv3 Information Menu options.
Table 17 SNMPv3 Information Menu options
Command | Usage |
|
usm | Displays User Security Model (USM) table information. |
|
view | Displays information about view name, subtrees, mask and type of view. |
|
access | Displays |
|
group | Displays information about the group that includes the security model, user name, and | |
| group name. |
|
comm | Displays information about the community table. |
|
taddr | Displays the Target Address table. |
|
tparam | Displays the Target parameters table. |
|
notify | Displays the Notify table. |
|
| Command Line Interface 32 | |