NEC N8406-022A SNMPv3 Notify Table configuration

The following table describes the SNMPv3 Target Parameters Table Configuration Menu options.

Table 72 SNMPv3 Target Parameters Table Configuration Menu options

Command	Description
name <1-32	Configures the locally arbitrary, but unique identifier that is associated with this entry.
characters>
mpmodel	Configures the message processing model that is used to generate SNMP messages.
snmpv1snmpv2csnm
pv3
model	Selects the security model to be used when generating the SNMP messages.
usmsnmpv1snmpv2
uname <1-32	Defines the name that identifies the user in the USM table, on whose behalf the SNMP
characters>	messages are generated using this entry.
level	Selects the level of security to be used when generating the SNMP messages using this
noAuthNoPrivauthN	entry. The level noAuthNoPriv means that the SNMP message will be sent without
oPrivauthPriv	authentication and without using a privacy protocol. The level authNoPriv means that
	the SNMP message will be sent with authentication but without using a privacy protocol.
	The authPriv means that the SNMP message will be sent both with authentication and
	using a privacy protocol.
del	Deletes the targetParamsTable entry.
cur	Displays the current targetParamsTable configuration.

SNMPv3 Notify Table configuration

Command: /cfg/sys/ssnmp/snmpv3/notify <notify number>

[SNMPv3 snmpNotifyTable 1			Menu]
name	- Set notify		name
tag	- Set notify tag
del	-	Delete notifyTable entry
cur	-	Display current notifyTable configuration

SNMPv3 uses Notification Originator to send out traps. A notification typically monitors a system for particular events or conditions, and generates Notification-Class messages based on these events or conditions.

The following table describes the SNMPv3 Notify Table Configuration menu options.

Table 73 SNMPv3 Notify Table Configuration Menu options

Command	Description
name <1-32	Defines a locally arbitrary but unique identifier associated with this SNMP notify entry.
characters>
tag <1-255	Defines a tag of 255 characters maximum that contains a tag value which is used to select
characters>	entries in the Target Address Table. Any entry in the snmpTargetAddrTable, that
	matches the value of this tag, is selected.
del	Deletes the notify table entry.
cur	Displays the current notify table configuration.

Command Line Interface 74