Trunk group information
Command: /info/l2/trunk
Trunk group 1, Enabled Protocol - Static port state:
20: forwarding
21: forwarding
22: forwarding
23: forwarding
24: forwarding
When trunk groups are configured, you can view the state of each port in the various trunk groups.
Layer 3 information
Command: /info/l3
[Layer 3 Menu] |
|
|
|
arp | - ARP Information Menu | ||
ip | - Show IP information | ||
igmp | - | Show | IGMP Snooping Multicast Group information |
dump | - | Dump | all layer 3 information |
|
|
|
|
The following table describes the Layer 3 Information Menu options.
Table 29 | Layer 3 information menu options | |
Command | Usage | |
arp | Displays the Address Resolution Protocol (ARP) Information Menu. | |
ip | Displays IP Information. IP information, includes: | |
| • | IP interface information: Interface number, IP address, subnet mask, VLAN number, and |
| • | operational status. |
| Default gateway information: Metric for selecting which configured gateway to use, | |
| • | gateway number, IP address, and health status |
| IP forwarding information: Enable status, lnet and lmask | |
| • | Port status |
igmp | Displays IGMP Information Menu. | |
dump | Dumps all switch information available from the Layer 3 Menu (10K or more, depending on | |
| your configuration). | |
| If you want to capture dump data to a file, set your communication software on your | |
| workstation to capture session data prior to issuing the dump commands. | |
Command Line Interface 41