NEC N8406-022A SNMPv3 View-basedAccess Control Model configuration

Table 67 SNMPv3 View Configuration Menu options

Command	Description
del	Deletes the vacmViewTreeFamily group entry.
cur	Displays the current vacmViewTreeFamily configuration.

SNMPv3 View-based Access Control Model configuration

Command: /cfg/sys/ssnmp/snmpv3/access <access number>

[SNMPv3 vacmAccess 1 Menu]

name	- Set group name
model	- Set security model
level	- Set minimum level of security
rview	- Set read view index
wview	- Set write view index
nview	- Set notify view index
del	- Delete vacmAccess entry
cur	- Display current vacmAccess configuration

The view-based Access Control Model defines a set of services that an application can use for checking access rights of the user. Access control is needed when the user has to process SNMP retrieval or modification request from an SNMP entity.

The following table describes the User Access Control Configuration Menu options.

Table 68 View-based Access Control Configuration Menu options

Command	Description
name <1-32	Defines the name of the group, up to a maximum of 32 characters.
characters>
model	Selects the security model to be used.
usmsnmpv1snmpv2
level	Defines the minimum level of security required to gain access rights. The level
noAuthNoPrivauthN	noAuthNoPriv means that the SNMP message will be sent without authentication and
oPrivauthPriv	without using a privacy protocol. The level authNoPriv means that the SNMP message
	will be sent with authentication but without using a privacy protocol. The authPriv
	means that the SNMP message will be sent both with authentication and using a privacy
	protocol.
rview <1-32	Defines a 32 character long read view name that allows you read access to a particular
characters>	MIB view. If the value is empty or if there is no active MIB view having this value then no
	access is granted.
wview <1-32	Defines a 32 character long write view name that allows you write access to the MIB view.
characters>	If the value is empty or if there is no active MIB view having this value then no access is
	granted.
nview <1-32	Defines a 32 character long notify view name that allows you notify access to the MIB
characters>	view.
del	Deletes the View-based Access Control entry.
cur	Displays the View-based Access Control configuration.

Command Line Interface 71