Extended Command Set

@20X (where X represents the Numbering Plan Group 0 - 3) Finds the Access Codes assigned to the Feature Code displayed in the First Data field. The first returned Access Code is displayed in the SD field. Additional Access Codes are displayed in the ED field.

^90 Copies the Programmable Key assignments from the station in the First Data field to the station in the Second Data field.

@980 Determines whether an Add-On exists for the station in the First Data field.

?1X (where X represents any command from the NEAX2000 IVS Command Set) Uses the First Data specified in the previous command as the First Data in this command. (Leave this Second Data field blank.)

?2X (where X represents any command from the NEAX2000 IVS Command Set) Uses the Second Data, that was specified or returned as a result of the previous command, as the First Data in this command. (Leave this Second Data field blank.)

*X (where X represents any command from the NEAX2000 IVS Command Set) Performs a PBX System Reset after executing the specified command. This operation will drop all calls, and should not be used with modem connections—only with direct connections.

!Performs a PBX System Reset. This operation will drop all calls, and should not be used with modem connections—only with direct connections.

 

MATWorX 32 User’s Guide

Page 62

NDA-24215 Revision 1.0

Page 69
Image 69
NEC NEAX2000IVS manual Extended Command Set