T.30 FAXByPass Codec
Flash key function (FXS only)
Keypad DTMF type
End of dial key
DTMF Detection Sensitivity
Dial Wait Timeout (1~60sec)
Inter Digits Timeout (1~5sec)
FAXByPass Keyword
FAXByPass Keyword
IP Address announcement
zAuto
Select the FAX ByPass Codec to use, you can choose the following:
zG.711
zG.711
zG.726 32k
Select the function of Flash key, you can choose the following:
zDisable
zTransfer
zSIP Message
Select the type of Keypad DTMF, you can choose the following:
z
zRFC2833
zSIP Info
Select the End of dial key, you can choose the following:
zDisable
z*
z#
Specify the grade of DTMF Detection Sensitivity, the value range is (1~5)
Specify the duration of dial waiting when the receiver is off hook. The range is 1~60 sec. Specify the interval of input digits, if the interval is over the setting, the system will end the dial and send out the DTMF. The limitation range is 1~5sec.
Some SIP Proxy need specify special keyword for FAXByPass function. Input the data as SIP Proxy required.
Some SIP Proxy need specify special keyword for FAXByPass function. Input the data as SIP Proxy required.
You can Enable/Disable this function,
If you select Enable, you can connect T1 port with a phone set and press #120#, you will hear
37
