Net Optics none Director Front Panel, Monitor Port LEDs, DNM / Network Port LEDs, Power LEDs

Director

Director Front Panel

The features of the Director front panel are shown in the following diagram.

10 SFP	2 XFP	DNM with 10/100/1000	DNM with SX Fiber
Monitor	Configurable	Copper Network Ports	Network Ports
Ports	10GbE Ports	(6 In-line or 12 Span Ports)	(6 In-line or 12 Span Ports)

Director ™

1 2 3 4 5

2

1

6 7 8 9 10

A B

A

B

In-Line 10/100/1000

10	LINK	In-Line	A		B		A		B		A		B
100	ACT	GigaBit
1000
			1	2	3	4	5	6	7	8	9	10	11	12

www.netoptics.com

Power LEDs Monitor Ports 2 Director Network Module (DNM) Slots

Network Ports

Figure 6: Director Front Panel

Monitor Port LEDs

Each Monitor port has two light-emitting diode (LED) indicators. The Link LED is illuminated when a link is estab- lished. The Activity LED blinks when traffic is passing through the port. They are located in the middle between the two rows of SFPs.

DNM / Network Port LEDs

Each 10/100/1000 Network or Span port has two LEDs. The Link LED is illuminated when a link is established. The Activity LED blinks when traffic is passing through the port. The Link LED also indicates the link speed: amber for 10Mbps, yellow for 100Mbps, and green for a 1000Mbps (1 Gbps). They are integrated in the RJ-45 connectors, Link on the left and Activity on the right.

Each 1-Gigabit Fiber Network or Span port has a single LED. It illuminates solid when a link is established, and it flashes when traffic is passing through the port. These Link LEDs are located below the LC fiber connectors.

10 Gigabit Port LEDs

Each configurable 10-Gigabit port has a single LED. It illuminates solid when a link is established, and it flashes when traffic is passing through the port. These Link LEDs are located to the left of the XFP fiber connectors.

Power LEDs

Two LED indicators for power, one for each of the redundant power supplies.

9

*** Confidential - DO NOT Distribute ***