Director
Network Port 5
Protocol =
TCP
+
Monitor Port 1
Protocol =
UDP
lter add in_ports=n1.5 ip_proto=6 action=redir redir_ports=m.1 lter add in_ports=n1.5 ip_proto=17 action=redir redir_ports=m.1
Figure 29: Logical OR filter connection
View filters
To view a list of all pending filters, enter filter list. To view the active filters, enter filter running.
Net Optics> filter list
001 ip_src=00000000/ffffffff,ip_dst=00000000/ffffffff,ip_proto=0000
l4_src_port=0080,l4_dst_port=0000,vlan=0000,action=3 in_ports=01
redir_ports=13
002 ip_src=0a010101/ffffffff,ip_dst=00000000/ffffffff,ip_proto=0000
l4_src_port=0000,l4_dst_port=0000,vlan=0000,action=1 in_ports=00 05
003 ip_src=00000000/ffffffff,ip_dst=00000000/ffffffff,ip_proto=0000
l4_src_port=0000,l4_dst_port=0025,vlan=0000,action=3 in_ports=00
redir_ports=12 Net Optics>
Figure 30: Filter list command Tip!____________________________________________________________________________________________________
The ID numbers shown at the left of each filter in the filter list are the IDs that apply for filter del id=<id> and filter inc id=<id> commands, because all three commands act on the pending filter lsit. Do not use the IDs in a filter running list as the reference for filter del or filter ins commands.
________________________________________________________________________________________________________
30
*** Confidential - DO NOT Distribute ***
