Net Optics none Passwd, Ping, Port set n1.1-n1.3 autoneg=on duplex=full, Port show, Quit, Restart

Director

Command	Sub-Command	Parameters	Example and description
passwd			passwd
			Interactively changes the password of the SSH user
			account
ping		<address>*	ping 10.1.1.4
			Parameters:
			<address> is an IP address
			Pings the specified IP address to check for connectivity
port	set	ports=<portlist>*	port set n1.1-n1.3 autoneg=on duplex=full
		autoneg=< on off >	Parameters:
		duplex=< full half >	<portllist> is a portlist
		speed=< 10 100 1000 >	For other parameters, select a value from the
			listed choices
			For 10/100/100 Copper interface Network and Moni-
			tor ports, enables or disables autonegotiation; selects
			the duplex mode; and sets the fixed speed (10Mbps,
			100Mbps, or 1000Mbps) if autonegotiation is off
	show		port show
			Displays the current port status and settings
quit			quit
			Exits the CLI shell (same as exit and logout)
restart			restart
			Reboots the Director device; also called warm boot;
			similar to power-cycling the device; does not change
			the configuration parameters or filters
save			save my_configuration-1
			Parameters:
			<filename> is the name of the file where the
			configuration is saved; a string; do not include an
			extension
			Saves the Director device configuration to a file;
			saved information includes port set-up and filters
show		<filename>*	show my_configuration-1
			Parameters:
			<filename> is the name of the file to display; a
			string; do not include an extension
			Displays the contents of the specified saved
			configuration file (see save command)
stats	clear	ports=all<[portlist>	stats clear ports=all
			Clears RMON statistics for the designated ports
	show	ports=all<[portlist>	stats show ports=m.2,n1.4
			Displays RMON statistics for the designated ports

45

*** Confidential - DO NOT Distribute ***