Net Optics none manual Filter list, Filter running, Filter sync, Help filter, History, Image, List

Director

Command	Sub-Command	Parameters		Example and description
filter	list	ipv6=< y n >		filter list
(continued)				Parameters:
				ipv6=y for IPv6 addressing; ipv6=n for IPv4 ad-
				dressing (defaults to IPv4 if parameter is omitted)
				Displays all pending filters (with filter IDs)
	running	ipv6=< y n >		filter running
				Parameters:
				ipv6=y for IPv6 addressing; ipv6=n for IPv4 ad-
				dressing (defaults to IPv4 if parameter is omitted)
				Displays all active filters
	sync			filter sync
				Loads the pending filter list with a copy of the currently
				active filters
help		<command>		help filter
				Parameter:
				<command> is any CLI command
				Displays information about the specified CLI command;
				if <command> is omitted, displays a list of all CLI
				commands
history				history
				Displays a numbered list of previously executed CLI
				commands; any command can be executed directly
				by entering the command number preceded by an
				exclaimation point; up- and down-arrow keys can be
				used to scroll through the command history buffeer
				(see ! command)
image		< 1 2 >		image 2
				Parameter:
				Valid values are 1 and 2
				Chooses which system image to boot from; if <n>
				is omitted, the current system image information is
				displayed (see upgrade command)
list				list
				Shows a list of filenames of saved Director device
				configurations (see save command)
load		<filename>*		load my_configuration-1
				Parameters:
				<filename> is the name of the file to load; a string;
				do not include an extension
				Loads a previously saved Director configuration (see
				save command)
logout				logout
				Exits the CLI shell (same as exit and quit)
module	show			module show
				Lists information about Director hardware modules
				including system serial number, DNM types, and
				XFPs
			44

*** Confidential - DO NOT Distribute ***