USB Drive Requirements, ReadySHARE Access | NETGEAR D6200 guide

D6200 WiFi DSL Modem Router

USB Drive Requirements

The WiFi DSL modem router works with 1.0 and 1.1 (USB Full Speed) and 2.0 (USB High Speed) standards. The approximate USB bus speeds are shown in the following table. Actual bus speeds can vary, depending on the CPU speed, memory, speed of the network, and other variables.

Table 9. USB drive speeds

Bus

USB 1.1

USB 2.0

Speed/Sec

12Mbits

480Mbits

The WiFi DSL modem router should work with most USB-compliant external flash and hard drives. For the most up-to-date list of USB drives supported by the WiFi DSL modem router, visit:

http://kbserver.netgear.com/readyshare

The WiFi DSL modem router supports both read and write access for FAT16, FAT32, and NTFS.

Note: Some USB external hard drives and flash drives require drivers to be loaded into the computer before the computer can access the USB device. Such USB devices do not work with the WiFi DSL modem router.

ReadySHARE Access

Once you have set up your WiFi DSL modem router, you can connect any USB storage device and share the contents with other users on your network.

You can access your USB device in any of the following ways:

•On Windows 7, Windows XP, Windows Vista, and Windows 2000 systems, select Start > Run and enter \\readyshare in the dialog box. Click OK.

•On Windows 7, Windows XP, Windows Vista, and Windows 2000 systems, open either Internet Explorer or Safari, and enter \\readyshare in the address bar.

•On Mac OS X (version 10.2 or later), enter smb://readyshare in the address bar.

•In My Network Places, enter \\readyshare in the address bar.

USB Storage

59

Image 59

NETGEAR D6200 user manual USB Drive Requirements, ReadySHARE Access

Contents

WiFi DSL Modem Router Trademarks SupportCompliance Contents Netgear genie Advanced Home Security Appendix a Supplemental Information Get to know your wireless router Hardware Setup Product Highlights Product Specifications Weee Unpack Your New Router Box contents Label Hardware Features Back Panel Adsl line USB port Gigabit Ethernet Power LAN portsAC power WAN port Reset button Front Panel Power DSL Internet Wireless USB D6200 WiFi DSL Modem Router Power On/Off LED Side Panel WiFi On/Off button WPS button D6200 WiFi DSL Modem Router WiFi On/Off button Position Your Wireless Router Two-Line Adsl Microfilter Included Adsl MicrofiltersOne-Line Adsl Microfilter Not Included Summary Cable Your D6200 WiFi DSL Modem Router Verify the Cabling Adsl Get Started with Netgear genie Use Standard TCP/IP Properties for Dhcp Prepare to Set Up the WiFi DSL Modem RouterTypes of Logins and Access Wireless Devices and Security Settings Browse to http//routerlogin.net Netgear genie Setup To use Netgear genie to set up your WiFi DSL modem router Upgrade WiFi DSL Modem Router Firmware Use Netgear genie after Installation WiFi DSL Modem Router Dashboard Basic Home Screen  To connect manually Add Wireless Devices or Computers to Your NetworkWi-Fi Protected Setup WPS Method Manual Method  To use WPS to join the wireless network Your Internet connection and network Netgear genie Basic Settings  To view or change ISP information Internet Basic SettingsInternet Setup Screen Fields Internet IP Address Does Your ISP Require a Login? Answer either yes or no Attached Devices Parental Controls Basic Wireless Settings  To view or change basic wireless settings Wireless Settings Screen Fields Wireless Network Change WPA Security Option and Passphrase Wireless Security Options Guest Networks  To set up a guest network Netgear genie App  To install the genie mobile app You can use the following QR codes to speed up this process Netgear genie Advanced Home Specify custom settings Setup Wizard Netgear genie Advanced Home Select either Push Button or PIN Number WPS Wizard To use the WPS Wizard Select Advanced WPS Wizard  To use the VPN Wizard Select Advanced VPN Wizard VPN Wizard Netgear genie Advanced Home Setup Menu  To configure Adsl Select Advanced Setup Adsl Settings Adsl Setup  To configure the WAN Select Advanced Setup WAN Setup WAN Setup Change the MTU Size Default DMZ Server Common MTU sizes  To change the MTU size Select Advanced Setup WAN Setup LAN Setup  To change the LAN settings Select Advanced Setup LAN Setup LAN Setup Screen Settings Use Router as Dhcp Server Use the WiFi DSL Modem Router as a Dhcp Server  To edit or delete a reserved address entry  To reserve an IP address Select Advanced Setup LAN SetupAddress Reservation  To configure QoS Select Advanced Setup QoS Setup Quality of Service Setup Add a Priority Rule Click Set Up QoS Rule Priority Policies for Applications and Online Games Priority Policies for MAC Addresses Priority Policies for Ethernet LAN Ports USB Storage Access and configure a USB storage drive USB Drive Requirements ReadySHARE Access  To share files with your friends and family File-Sharing Scenarios Share Large Files over the Internet USB Storage Basic Settings Add or Edit a Network Folder USB Storage Advanced Settings USB Storage Media Server Settings Specify Approved USB Devices Select the Allow only approved devices check box Access the WiFi DSL Modem Router USB Drive Remotely UsingConnect to the USB Drive from a Remote Computer Safely Remove a USB Drive USB Storage ReadySHARE Printer Access and configure a USB printer  To download ReadySHARE Printer Download the ReadySHARE Printer Utility  To install the Netgear USB Control Center Install the Netgear USB Control Center Set Up the Netgear USB Control Center ReadySHARE Printer Configure the Netgear USB Control Center Select Tools Configuration  To configure the Netgear USB Control Center Netgear USB Control Center Manage USB Print and Scan Jobs  To launch the Netgear USB Control Center Use the Scan Feature of a Multifunction USB Printer  To use the scan feature of a multifunction USB printer Security Keep unwanted content out of your Click Delete Keyword Click Apply Keyword Blocking of Http TrafficSelect Advanced Security Block Sites  To delete a keyword or domain  To specify a trusted computer Firewall Rules Security Log LAN UsersWAN Servers TCP UDP TCP/UDP Add Custom Services to Allow or Block Schedule for Firewall Rules Security Event Email Notifications Security Manage your network Administration Upgrade the WiFi DSL Modem Router Firmware LAN Port View WiFi DSL Modem Router StatusRouter Information Guest Network 2.4 GHz and 5 GHz Wireless Settings 2.4 GHz and 5 GHzInternet Port Connection Statistics Reboot the Router Click Set Interval Connection Status View VPN Status  To view the logs Select Advanced Administration Logs View Logs of Web Access or Attempted Web Access Back Up Settings Manage the Configuration File Erase Set PasswordRestore Configuration Settings Do not interrupt the reboot process  To set up password recovery Diagnostics Administration 101 Fine-tune your network Advanced Settings Advanced Wireless Settings Turn Off Radio By Schedule WPS Settings Wireless Access List Click the Set Up Access List Click Turn Access Control On Wireless repeating scenario Wireless Repeating Function WDS Wireless Repeating Function Set Up the Base Station Port Forwarding and Port Triggering Set Up a Repeater Unit To configure the WiFi DSL modem router as a repeater unit Select Advanced Advanced Wireless Repeating Function Destination port number Remote Computer Access Basics Port Triggering to Open Incoming Ports Port Forwarding to Permit External Host Communications How Port Forwarding Differs from Port Triggering Set Up Port Forwarding to Local Servers Port Forwarding is selected as the service type Add a Custom Service Application Example Making a Local Web Server Public Click the Add Custom ServiceClick Edit Service or Delete Service Edit or Delete a Port Forwarding Entry Set Up Port Triggering Click Add Service Dynamic DNS Static Routes Select the Use a Dynamic DNS Service check box Advanced Settings 122 Advanced Settings 123 Remote Management Advanced Settings 125 Universal Plug and Play IPv6 Click Restart Counter Now Traffic Meter Advanced Settings 129 VPN Policies Device Mode Advanced Settings 131 Add or Edit an Auto VPN Policy Advanced Settings 133 Parameters IKEFully Qualified Domain Name. Your domain name Add or Edit a Manual VPN Policy Advanced Settings 136 Advanced Settings 137 Diagnose and solve problems Troubleshooting Sequence to Restart Your Network Wireless SettingsNetwork Settings Quick Tips Troubleshoot with the LEDs Power LED Is Off or BlinkingPower LED Stays Red Push N Connect WPS Button Does Not Work Wireless LED Is OffLEDs Never Turn Off Internet or Ethernet Port LEDs Are Off Cannot Log In to the Router Cannot Access the Internet Troubleshooting 143  To troubleshoot a PPPoE connection Select Administration Router Status Click Connection StatusTroubleshoot PPPoE Troubleshoot Internet Browsing Incorrect Date or Time Wireless ConnectivityChanges Not Saved Test the LAN Path to Your Router Restore the Factory Settings and PasswordTroubleshoot Your Network Using the Ping Utility Test the Path from Your Computer to a Remote Device Troubleshooting 148 Supplemental Information Specifications Factory default settings Factory Settings D6200 WiFi DSL Modem Router Factory default settings Technical Specifications Supplemental Information 152 153 Index 154 155 156