NETGEAR Cable Your D6300 WiFi DSL Modem Router, Two-Line Adsl Microfilter Included, Summary

D6300 WiFi DSL Modem Router

Second best when you do not have a separate ADSL line for the router is to get a separate splitter. To use a one-line filter with a separate splitter, insert the splitter into the phone outlet, connect the one-line filter to the splitter, and connect the phone to the filter.

Two-Line ADSL Microfilter (Included)

Use an ADSL microfilter with a built-in splitter when there is a single wall outlet that provides connectivity for both the WiFi DSL modem router and your telephone equipment. Plug the ADSL microfilter into the wall outlet, plug your phone equipment into the jack labeled Phone, and plug the wireless modem router into the jack labeled ADSL.

Plugs into the ADSL line

Figure 7. Two-line ADSL microfilter with built-in splitter

Summary

•One-line ADSL microfilter (not included). Use with a phone or fax machine.

•Splitter (not included). Use with a one-line ADSL microfilter to share an outlet with a phone and the WiFi DSL modem router.

•Two-line ADSL microfilter with built-in splitter (included). Use to share an outlet with a phone and the WiFi DSL modem router.

Cable Your D6300 WiFi DSL Modem Router

WARNING:

DO not stack equipment, or place equipment in tight spaces, or in drawers. Be sure that your equipment is surrounded by at least 2 inches of air space. The unit should not be wall mounted.

Hardware Setup

19