
D6300 WiFi DSL Modem Router
Table 1. Power On/Off LED
Icon | LED Activity | Description |
| Solid green | The router is ready. |
| Solid amber | The router is starting. |
| Off | Power is not supplied to the router. |
| Restore Factory | LED blinks momentarily when the Restore Factory Settings button on the |
| Settings | bottom of the unit is pressed for 6 seconds. The Power LED then blinks red |
|
| three times when the Restore Factory Settings button is released and then |
|
| turns green as the gateway resets to the factory defaults. |
Table 2. DSL LED
Icon | LED Activity | Description |
| Solid green | You have an ADSL connection. In technical terms, the ADSL port is |
|
| synchronized with an ISP’s |
| Blinking green | Indicates that the WiFi DSL modem router is negotiating the best possible |
|
| speed on the ADSL line. |
| Off | The unit is off or there is no ADSL connection. |
Table 3. | Internet LED |
|
Icon | LED Activity | Description |
| Solid green | You have an Internet connection. If this connection is dropped due to an |
|
| idle |
|
| Internet connection is dropped for any other reason, the LED turns off. |
| Solid amber | The Internet (IP) connection failed. See Cannot Access the Internet on |
|
| page 122 for troubleshooting information. |
| Off | No Internet connection is detected or the device is in bridge mode (an |
|
| external device handles the ISP connection). |
Table 4. Wireless LED |
| |
Icon | LED Activity | Description |
| Solid blue | There is wireless connectivity. |
| Blinking blue | A |
| Off | There is no wireless connectivity. You can still plug an Ethernet cable into |
|
| one of the LAN ports to get wired connectivity. |
Hardware Setup
15