ProSafe Plus Switch Utility
Port-Based Configuration
Basic Port Based VLAN Configuration
The Basic Port Based VLAN Configuration screen lets you partition your network into different segments. Ports with the same ID are grouped into the same VLAN group.
To assign members of a VLAN group:
1.Select the switch.
2.Select VLAN. This displays the Basic
3.Select Enable. A message displays asking if you want to delete previous VLAN settings.
4.Click Yes. The Basic Port Based VLAN Configuration screen displays.
5.For each port to be added to the group, select the port and then the VLAN Group.
If all the VLAN groups share the same uplink to the Internet or servers, enter all in the VLAN Group field for the port that you want to use for the uplink.
6.When you are finished adding ports to the VLAN group, click Apply.
Advanced Port Based VLAN Configuration
The advanced
To assign members of a VLAN group:
1.Select the switch.
2.Click the VLAN tab. This displays the
3.Select Advanced. This displays the Advanced
4.Select Enable. A message displays asking if you want to delete previous VLAN settings.
5.Click Yes. The Advanced
Note: VLAN IDs are limited to the number of ports on the switch,
6.Select a VLAN ID from the VLAN identifier field and select the ports that you want to add to the VLAN.
7.Click Apply. If you want to create more VLANs, repeat these steps with another VLAN ID.
Virtual LAN Configuration
21
