NETGEAR ME101 specification

ME101 802.11b Wireless Ethernet Bridge Status Settings

In the Configuration Utility and in the browser-based configuration software, you can get certain status information about your bridge and your wireless network.

The Status tab of the Configuration Utility shows:

•The network SSID and the wireless router’s or access point’s media access control (MAC) address

•The type of network

•The channel and frequency of the bridge

•The type of encryption currently active

•The bridge’s IP address

•Transmitted and received data amounts

•A signal strength indicator

The Stations tab lists all active wireless access points and routers within range of the bridge.

15

Image 17

NETGEAR manual ME101 802.11b Wireless Ethernet Bridge Status Settings

Contents

Page Table of Contents Introduction Package Contents Placement and Range Guidelines Preparing to Install the ME101Operating Mode System Requirements IP address ME101 Default Wireless Configuration Settings Room Installing the ME101 Turn off the gaming console or other Ethernet-enabled device Configuring Your ME101 Click Install Utility Installing the Configuration Utility Configuring the Bridge for Your Wireless Network Upgrading the Bridge Changing the Password for the Bridge Enabling WEP Security on the Bridge Type http//192.168.0.200 as the Web address and press Return Using the Browser-based Configuration Software Changing the password Configuring the bridge settings Select an Encryption Length to enable WEP security Changing the Security Settings Restoring the Bridge to the Default Settings ME101 802.11b Wireless Ethernet Bridge Lights and SettingsME101 802.11b Wireless Ethernet Bridge Lights ME101 802.11b Wireless Ethernet Bridge Status Settings Page Symptom Cause Solution Troubleshooting Tips System Requirements for the Bridge Bridge SpecificationsEnvironmental Specifications CE-Konformitätserklärung CE Declaration of ConformityDéclaration de conformité CE Statement of Conditions Support Information Technical Support