4.Turn off the gaming console or other Ethernet-enabled device.

ME101 Wireless

 

Ethernet Bridge

Gaming console or other

 

Ethernet-enabled device

5Connect the provided Ethernet cable between the ME101 Wireless Bridge and the gaming console or other Ethernet-enabled device.

Note: The ME101 Wireless Bridge should be connected to one device only. Don’t connect it through a network switch or hub.

6.Connect the power adapter to the wireless bridge and plug the power adapter in to a

power outlet. The Power and Wireless LAN lights should light up.

7. After you see the Wireless LAN light

light up, turn on the gaming console or other

Ethernet-enabled device.

 

If the bridge and the Ethernet-enabled device are successfully connected, the Network

light will light up. This light flashes when there is network activity.

Note: If your setup works with the default settings, you don’t need to install the software from the provided CD to configure the bridge unless you need to change the Country/Region setting from the default setting (U.S.A.).

5

Page 7
Image 7
NETGEAR ME101 manual Turn off the gaming console or other Ethernet-enabled device