Installing the Configuration Utility
To configure the bridge you use the configuration utility on the included GearBox CD.
Note: To run the configuration utility, you must have the bridge directly connected using the provided Ethernet crossover cable to a computer running Windows 98 or 98SE, Me, 2000, or XP. If you have a Macintosh® computer, use the
1.Insert the GearBox CD in a networked computer’s
The NETGEAR software installation utility should start up automatically.
2.Click Install Utility.
3.Follow the instructions on screen to install the ME101 Configuration Utility.
4.Click Finish.
5.Restart the computer.
6.If you had the bridge connected to another device, you must connect it to the computer where you installed the Configuration Utility.
a.If you had the bridge powered up, unplug it.
b.Connect the provided Ethernet crossover cable between the computer and the bridge.
c. Plug the power adapter into the bridge and then plug the power adapter into a power source.
ME101 Wireless
Ethernet Bridge
7
