Reference Guide for the Model RT328 and Model RH348 ISDN Routers
Table | Menu 11.1 Remote Node Profile Fields | ||
|
|
| |
Field |
| Description | |
|
| ||
Rem Node Name | This field is required. Enter a descriptive name for the remote node (for example, | ||
|
| MyOffice). This field supports up to eight characters. This name must be unique | |
|
| from any other remote node name or remote | |
|
|
| |
Active |
| Press the space bar to toggle between Yes and No. When a remote node is | |
|
| deactivated, it has no effect on the operation of the router, even though it is still kept | |
|
| in the database and can be activated in the future. Deactivated nodes are displayed | |
|
| with a minus sign | |
|
|
| |
Call Direction |
| If this parameter is set to Both, the router can place and receive calls to and from | |
|
| this remote node. If set to Incoming, the router does not place a call to this remote | |
|
| node. If set to Outgoing, the router will drop any call from this remote node. | |
|
| Several other fields in this menu depend on this parameter. For example, in order | |
|
| to enable Call Back, the Call Direction must be Both. | |
|
|
|
|
Incoming: |
|
|
|
Rem Login |
| Enter the login name that this remote node will use when it calls into the router. | |
Name |
|
|
|
Rem Password | Enter the password used when this remote node calls into the router. | ||
Rem CLID |
| This field is active only if Call Direction is either Both or Incoming. Otherwise, N/A | |
|
| appears in the field. This is the Calling Line ID (the telephone number of the calling | |
|
| party) of this remote node. If you enable the CLID Authen field in Menu 13 - Default | |
|
| Dial In, the router checks this number against the CLID in the incoming call. If they | |
|
| do not match and the CLID Authen is Required, the router rejects the call. | |
Call Back |
| This field is valid only if Call Direction is Both. Otherwise, N/A appears in the field. | |
|
| This field determines whether or not you want the router to call back after receiving | |
|
| a call from this remote node. If this option is enabled, the router disconnects the | |
|
| initial call from this node and calls the node back at the Outgoing Primary Phone | |
|
| Number. | |
|
|
|
|
Outgoing: |
|
|
|
My Login Name | This is a required field if Call Direction is either Both or Out. Enter the login name | ||
|
| your router uses when it calls this remote node. | |
My Password |
| This is a required field if Call Direction is either Both or Out. Enter the password | |
|
| your router uses when it calls this remote node. | |
Authen |
| This field sets the authentication protocol used for outgoing calls. Options for this | |
|
| field are: | |
|
| • | |
|
| or PAP when PAP is requested by the remote node (Default). | |
|
| • | |
|
| • | |
|
|
| |
|
|
|
|
| Remote Node Configuration |