Reference Guide for the Model RT328 and Model RH348 ISDN Routers
Applying the Filter
When the filter design is finished, you must tell the router where to apply the filter. Apply it as a Call Filter in the remote node that reaches your DNS server(s) (usually your ISP node). Go to Menu 11.1, Remote Node Profile, and enter the number of the filter under “Call Filter Sets” as shown in Figure
Figure
| Menu 11.1 - Remote Node Profile |
Rem Node Name= MyISP | Edit PPP Options= No |
Active= Yes | Rem IP Addr= 0.0.0.0 |
Call Direction= Outgoing | Edit IP= No |
Incoming: | Telco Option: |
Rem Login= | Transfer Type= 64K |
Rem Password= ******** | Allocated Budget(min)= 0 |
Rem CLID= N/A | Period(hr)= 0 |
Call Back= N/A |
|
Outgoing: | Session Options: |
My Login= netgear | Input Filter Sets= |
My Password= ******** | Output Filter Sets= |
Authen= CHAP/PAP | Call Filter Sets= 1 <<- APPLY |
Pri Phone #= 18005551212 | Idle Timeout(sec)= 300 |
Sec Phone #= |
|
Press ENTER to Confirm or ESC to Cancel:
Figure
When you finish, restart the router.
Filter Configuration |