Reference Guide for the Model RT328 and Model RH348 ISDN Routers

Table 5-1.

Menu 11.1 Remote Node Profile Fields (continued)

 

 

 

Field

 

Description

 

 

 

Session Options:

 

 

Output Filter Sets

In these fields, select which filter set(s) you would like to implement to filter the

Call Filter Sets

incoming and outgoing traffic between this remote node and the router. You can

 

 

choose from 12 different filter sets. In addition, you can link up to 4 filter sets

 

 

together for further customization (for example, 1, 5, 9, 12). Spaces and commas

 

 

are accepted in this field. The default is blank (no filters are defined). Refer to

 

 

Chapter 8, “Filter Configuration,” for more information about configuring filters.

Idle Timeout (sec)

This value specifies the number of idle seconds elapsed before the remote node is

 

 

automatically disconnected. Idle seconds is the period of time where no data is

 

 

passed between the remote node and your router. Administrative packets such as

 

 

RIP are not counted as data. The default is 300 seconds (5 minutes).

 

 

 

Editing PPP Options

To edit PPP options:

1.Select Yes in the Edit PPP Options field of Submenu 11.1 - Remote Node Profile.

2.Press [Enter] to display Menu 11.2 Remote Node PPP Options.

3.Edit the options described in Table 5-2.

4.Press [Enter] at the Press ENTER to Confirm... prompt to confirm your selections, and return to the previous menu.

Press [Esc] at any time to cancel your selections.

5.Continue to the end of Menu 11.1 and press [Enter] to save the selections you made in Menu 11.2.

5-4

Remote Node Configuration