|
| Reference Guide for the Model RT328 and Model RH348 ISDN Routers | ||
|
|
|
|
|
Table | TCP/IP Filter Rule Menu Fields | |||
|
|
|
| |
Field |
| Descriptions |
|
|
|
|
|
| |
Active |
| In this field, you can make the filter rule active (Yes) or make the filter rule inactive (No). | ||
|
|
|
| |
IP Protocol |
| Protocol refers to the | ||
|
| entered in this field should be between 0 and 255 (for example, 6 refers to the TCP | ||
|
| protocol). | ||
|
|
|
| |
IP Source Route |
| Yes or No in this field determines whether to check the source route. | ||
|
|
|
|
|
Destination: |
|
|
|
|
IP Addr |
| In this field, enter the destination IP address of the packet you want to filter. The | ||
|
| address is usually written in | ||
|
| d are numbers between 0 and 255. | ||
IP Mask |
| In this field, enter the IP subnet mask that will be used to mask the bits of the | ||
|
| IP address given in Destination: IP Addr. Refer to Chapter 1, “Introduction,” for more | ||
|
| information. | ||
Port # |
| In this field, enter the destination port of the packets that you want to filter. The range of | ||
|
| this field is 0 to 65535. | ||
Port # Comp |
| In this field, select the comparison quantifier you want to enable to compare to the value | ||
|
| given in Destination: Port #. There are five options for this field: | ||
|
| • None (default) | ||
|
| • Less | ||
|
| • Greater | ||
|
| • Equal | ||
|
| • Not Equal | ||
|
|
|
|
|
Source: |
|
|
|
|
IP Addr |
| In this field, enter the source IP address of the packet you want to filter. The IP address | ||
|
| is usually written in | ||
|
| numbers between 0 and 255. | ||
IP Mask |
| In this field, enter the IP subnet mask that is used to mask the bits of the IP Address | ||
|
| given in Source: IP Addr. See “Netmask” on page | ||
|
| masks. | ||
Port # |
| In this field, enter the source port of the packets that you want to filter. The range of this | ||
|
| field is 0 to 65535. | ||
|
|
|
|
|
Filter Configuration |