ProSafe 5 AP Wireless Management Software WMS105
To use Auto Discovery:
1.On the Configuration tab select Access Point Discovery.
2.Click Search.
•The Wireless Management Software searches for NETGEAR products on the LAN based on MAC address, and identifies which are access points.
•The access points located through discovery are displayed on the screen.
3.Check the discovery results to make sure that all the access points are listed. See “Discovery Results” on page 11.
4.Add the access points as described in “Adding Access Points” on page 12.
IP Discovery
Use IP discovery to discover access points in a different IP network than the Wireless Management Software. You can search for a maximum of 255 IP addresses at a time. NETGEAR recommends that you split up your search if you have access points in multiple networks.
10 Chapter 2: Access Point Discovery
