ProSafe 5 AP Wireless Management Software WMS105

Reset

The Reset screen lets you reboot managed access points.

1.On the Maintenance tab select Reset > Access Points > Reboot:

2.Select the Yes radio button.

3.Click Apply to reboot the access points.

SNMP

You can use SNMP for the Wireless Management Software. Enable SNMP to allow the SNMP network management software, such as HP OpenView, to monitor the Wireless Management Software by using SNMPv1/v2 protocol.

On the Maintenance tab, select Remote Management > System > SNMP:

SNMP checkbox: Enable SNMP for the Wireless Management Software.

Read-Only Community Name: The community string to allow the SNMP manager to read the WMS105 MIB objects.

Read-Write Community Name: The community string to allow the SNMP manager to read and write the WMS105 MIB objects.

Trap Community Name: The community name which is associated with the IP address to Receive Traps.

IP address to Receive Traps: The IP address of the SNMP manager to receive traps sent from the Wireless Management Software.

Chapter 6: Maintenance 31

Page 31
Image 31
NETGEAR WMS105-10000S user manual Reset, Snmp