ProSafe 5 AP Wireless Management Software WMS105
Access Point Status Details
From the Access Point Status screen, click the Details button to view this page.
You can use the Refresh button to update statistics and information.
The Access Point Status screen shows configuration settings, current wireless settings, current clients and current traffic statistics.
•Access Point Name: The access point’s NetBIOS name.
•Model: The managed access point’s model.
•Group: The configured group of managed access point.
•IP Address: The IP Address of managed access point.
•Ethernet MAC Address: The Ethernet MAC address of managed access point.
•2.4 GHz Channel: 2.4 GHz channel configured on access point; set to
•5 GHz Channel: 5 GHz channel configured on access point; set to
•Load Balancing: Load balancing enable/disable status for access point.
Profile Information
The section displays configured and enabled security profiles on the access point.
•Type: 802.11 b/bg/ng or 802.11 a/na mode for security profile.
•SSID: Wireless Network SSID.
•Security: The mode of security configured for the profile.
•VLAN: VLAN configured for the security profile.
Client Information
This section displays access point client station information.
•MAC: Wireless MAC of the access point client.
•SSID: Wireless SSID configured on the managed access point to which the client connects.
•Channel: The channel which client is using to connect.
•Mode: The mode (802.11 b/bg/ng or 802.11 a/na) for the security profile.
•Auth: The authentication mode (open, WEP, WPA, or WPA2) of security.
Chapter 5: Monitoring 27
