ProSafe 5 AP Wireless Management Software WMS105
experiences interference on a channel, the Wireless Management Software allocates a different channel to that access point.
•Client aware RF Management: If this Enable radio button is selected, the Wireless Management Software will not modify the channel for an access point with associated clients that would be impacted by the channel change. The Wireless Management Software will wait for the next scheduled channel allocation to adjust the channel.
•
•Run Channel Allocation at: Specify at what time of the day the channel allocation can modify access point RF configuration.
•Run Channel Allocation every: Specify weekly schedule for running channel allocation.
•Run Channel Allocation now: Press button to run channel allocation immediately.
3.Enter the Custom RF Settings:
•Mode Settings: Specify the radio mode preference to set on the access points.
Most access points are configured with the fastest mode by default. You can use the Mode Settings field to change this. For example, you could specify that an access point that supports
•2.4GHz or 5GHz band selection: This selection affects only dual band access points that can only be set to one band at a time such as the WNDAP330. You can use this field to specify which band the access point should use.
Note: For dual concurrent access points, both radio modes are enabled by default.
4.Click Apply so that your changes take effect.
14 Chapter 3: Wireless Configuration
