Chapter 4: Security Configuration | 21
ProSafe 5 AP Wireless Management Software WMS105
1. On the Configuration tab select Security > Basic > Rogue Access Points:
The Wireless Management Software can support up to 512 total rouge access points
from the Known and Unknown lists combined.
2. Enter the following information:
• Import AP List from a file. This field allows you to import a list of approved access
points from a saved file. This file must be a simple text file with one MAC address per
line.
• Merge. The current list is maintained and the access points in the imported list is
added to the approved list and the Known AP List.
• Known AP List. Approved access points. To remove an access point from this list,
select its checkbox and click Delete.
• Unknown AP List. Detected unidentified access points.
3. Adjust the Known AP List.
• You can click Refresh to scan for other access points in the vicinity whose details are
not in the Known AP List. If such access points are found, they are added to this list.
• To move an access point from the Unknown AP list to the Known AP list, select its
checkbox and click Move.
4. When you are finished making changes, click Apply.
MAC Authentication
This lets you block the network access privilege of the specified stations with the Wireless
Management Software-managed access point. The settings are applied only to managed
NETGEAR ProSafe access points.