NETGEAR WMS105-10000S user manual Time Settings

ProSafe 5 AP Wireless Management Software WMS105

•Country/Region: This field displays the region of operation for the Wireless Management Software and the access points managed by the Wireless Management Software. In the United States, the country is preset and cannot be changed on the access points. If the Country/Region is not set up correctly, it could result in the access points being inaccessible by the Wireless Management Software.

For products sold outside the United States, you must select a country or region. It might not be legal to operate the access points in a country/region not shown here. If your location is not listed, check with your local government agency or check the NETGEAR web site for more information on which channels to use.

Time Settings

On the Configuration tab, select System > Basic > Time Settings:

This page lets you configure the time-related settings of your Wireless Management Software and managed access points. It has the following options:

•Time Zone: Select the local time zone for your region or country.

•Current time: The current time at your location.

•NTP Client: Enable this option to use a Network Time Protocol (NTP) server to synchronize the clock of the Wireless Management Software and managed access points. Disable this option if you do not want to use an NTP server.

•Use Custom NTP Server: Select this check box if you wish to use an alternate NTP Server. By default, the NETGEAR NTP server is used by the access point.

•Hostname / IP Address: Provide the host name or IP address of the NTP server, if you are using a custom NTP server.

Chapter 1: Getting Started 7