9-6 User’s Reference Guide
IP Profile Parameters
Address Translation Enabled: | Yes |
IP Addressing... | Unnumbered |
Remote IP Address: | 0.0.0.0 |
Remote IP Mask: | 0.0.0.0 |
Filter Set... |
|
Remove Filter Set |
|
Receive RIP: | Off |
Transmit RIP: | Off |
Return/Enter to select <among/between> ...
Configure IP requirements for a remote network connection here.
When using numbered interfaces, the Netopia Router will use its local WAN IP address and subnet mask to send packets to the remote router. Both routers have WAN IP addresses and subnet masks associated with the connection.
6.If your ISP uses unnumbered
Note: When using unnumbered interfaces, the Netopia Router will use either its local Ethernet IP address or its NAT (Network Address Translation) address (if so configured) and subnet mask to send packets to the remote router. Neither router has a WAN IP address or subnet mask associated with this connection. These default addresses will request that the remote router dynamically assign an address at the time the connection is made.
7.If you entered 0.0.0.0, when your Netopia R5000 Series Router connects to the ISP, the remote router assigns your Netopia R5000 Series Router an IP address that external users use to communicate with your network.
The following Quick View screen shows an example in which 192.168.100.6 is assigned to the Netopia R5000 Series Router. “NAT” indicates that the address was assigned dynamically by Network Address Translation.
