New Buck Corporation DV1000 Corner Termination With Optional Rear Vent, Optional Rear Vent Ter

OPTIONAL DV1000 REAR HORIZONTAL VENT TERMINATION FIREPLACE

This appliance has a rear vent termination option. (you must purchase a DV1000 with this op- tion from your dealer) Use termination kit #PP-DVVK-4F-1 only. This installation option can only be used exactly as shown in figure 5. Follow the direction provided with the termination kit. (see Horizontal Air Termination Installation page )

DV1000

* 24-1/4”

*20” “From the rear of the unit to the out- side wall.”

*8” 3” min.

1” min.

Flex Pipe

3/4” WALL BOARD

2” x 4” WALL STUD

3/4” BLACK EXTERIOR WALL BOARD

2” x 4” x 8” BRICK EXTERIOR SURFACE

DEFLECTOR SHIELD

HORIZONTAL

TERMINATION CAP

FILL ANY CRACKS OR GAPS

WITH HIGH TEMPERATURE

CAULK

NOTE: This is only an example. Walls may vary in materials and construction type.

FIGURE 8/ OPTIONAL REAR VENT TER-	9-1/2” WALL
MINATION EXAMPLE.

CORNER TERMINATION WITH OPTIONAL REAR VENT

20”

The maximum length for a corner installation is 20”, with a minimum 8” rise.

FIGURE 9

20” 8”

Page 12