Nikon 13456, 1542 e1: Flash Sync Speed

e: Bracketing/Flash

e1: Flash Sync Speed

Gbutton ➜ ACustom Settings menu

This option controls flash sync speed.

Option	Description
	Auto FP high-speed sync is used when a compatible
	flash unit is attached (0 430). If the built-in flash or
1/320 s	other flash units are used, shutter speed is set to 1/320 s.
(Auto FP)	When the camera shows a shutter speed of 1/320 s in
	exposure mode eor g, auto FP high-speed sync will be
	activated if the actual shutter speed is faster than 1/320 s.
	Auto FP high-speed sync is used when a compatible
	flash unit is attached (0 430). If the built-in flash or
1/250 s	other flash units are used, shutter speed is set to 1/250 s.
(Auto FP)	When the camera shows a shutter speed of 1/250 s in
	exposure mode eor g, auto FP high-speed sync will be
	activated if the actual shutter speed is faster than 1/250 s.
1/250 s–1/60 s	Flash sync speed set to selected value.

AFixing Shutter Speed at the Flash Sync Speed Limit

To fix shutter speed at the sync speed limit in shutter-priority auto or manual exposure modes, select the next shutter speed after the slowest possible shutter speed (30 s or &). An X (flash sync indicator) will be displayed in the viewfinder and control panel.

AAuto FP High-Speed Sync

Allows the flash to be used at the highest shutter speed supported by the camera, making it possible to choose the maximum aperture for reduced depth of field even when the subject is backlit in bright sunlight. The information display flash mode indicator shows “FP” when auto FP high-speed sync is active (0 194).

329