6Compose the shot.

Compose the shot and arrange the flash units as shown below. Note that the maximum distance at which the remote flash units can be placed may vary with shooting conditions.

 

60 ° or less

10 m/33 ft or less

5 m/15 ft or less

 

30 ° or less

 

Camera (built-in flash)

 

30 ° or less

 

5 m/15 ft or less

 

60 ° or less

Wireless remote sensors on flash units should face camera.

7Configure the remote flash units.

Turn all the remote flash units on, adjust group settings as desired, and set them to the channel selected in Step 4. See the flash unit instruction manuals for details.

8Raise the built-in flash.

Press the flash pop-up button to raise the built-in flash. Note that even if – – is selected for Built-in flash > Mode, the built- in flash must be raised so that monitor preflashes will be emitted.

336