3Select a preset.

Press the Ubutton and rotate the sub-command dial until the desired white balance preset (d-1 to d-6) is displayed in the control panel.

Ubutton

Sub-command

Control panel

 

dial

 

4 Select direct measurement mode.

 

Release the Ubutton briefly and

 

then press the button until the L

 

icon in the control panel starts to

 

flash. A spot white balance target

Control panel

(r) will be displayed at the selected

focus point.

5Position the target over a white or grey area. While Lflashes in the display, use

the multi selector to position the r over a white or grey area of the subject. To zoom the area around the target in for more precise positioning, press the Xbutton.

164