❚❚Commander Mode

Use the built-in flash as a master flash controlling one or more remote optional flash units in up to two groups (A and B) using advanced wireless lighting (0 430).

Selecting this option displays the menu shown at right. Press 4 or 2 to highlight the following options, 1 or 3 to change.

 

Option

Description

 

Built-in

Choose a flash mode for the built-in flash (commander flash).

 

flash

 

 

 

 

 

 

TTL

i-TTL mode. Choose flash compensation from values

 

between +3.0 and –3.0 EV in increments of 1/3 EV.

 

 

MChoose the flash level.

The built-in flash does not fire, although remote flash units

–– do. The built-in flash must be raised so that it can emit monitor pre-flashes.

Group A Choose a flash mode for all flash units in group A.

TTL

i-TTL mode. Choose flash compensation from values between +3.0 and –3.0 EV in increments of 1/3 EV.

Auto aperture (available only with compatible flash units;

AA0 430). Choose flash compensation from values between +3.0 and –3.0 EV in increments of 1/3 EV.

MChoose the flash level.

–– The flash units in this group do not fire.

 

Choose a flash mode for all flash units in group B. The

Group B

options available are the same as those listed for Group A,

 

above.

 

 

Channel

Choose from channels 1–4. All flash units in both groups

 

must be set to the same channel.

334