Option

Description

 

If Sub-command dial is selected, aperture can only be

 

adjusted with the sub-command dial (or with the main

 

command dial if On is selected for Change main/sub >

 

Exposure setting). If Aperture ring is selected, aperture

Aperture

can only be adjusted with the lens aperture ring and the

setting

camera aperture display will show aperture in increments of

 

1 EV (aperture for type G and E lenses is still set using the

 

sub-command dial). Note that regardless of the setting

 

chosen, the aperture ring must be used to adjust aperture

 

when a non-CPU lens is attached.

 

 

 

If Off is selected, the multi selector is used to choose the

 

picture displayed during full-frame playback, highlight

 

thumbnails, and navigate menus. If On or On (image

 

review excluded) is selected, the main command dial can

 

be used to choose the picture displayed during full-frame

 

playback, move the cursor left or right during thumbnail

 

playback, and move the menu highlight bar up or down.

Menus and

The sub-command dial is used in full-frame playback to skip

forward or back according to the option selected for Sub-

playback

dial frame advance and in thumbnail playback to page up

 

or down. While menus are displayed, rotating the sub-

 

command dial right displays the sub-menu for the selected

 

option, while rotating it left displays the previous menu. To

 

make a selection, press 2, the center of the multi selector, or

 

J. Select On (image review excluded) to prevent the

 

command dials from being used for playback during image

 

review.

 

 

Sub-dial

When On or On (image review excluded) is selected for

Menus and playback, the sub-command dial can be

frame

rotated during full-frame playback to select a folder or to

advance

skip forward or back 10 or 50 frames at a time.

 

352