• Wireless Remote Controller WR-R10/WR-T10: When a WR-R10 wireless remote controller is attached to ten-pin remote terminal using a WR-A10 adapter, the camera can be controlled wirelessly using a WR-T10 wireless

Wireless

remote controller.

• Wireless Remote Controller WR-1: The WR-1 can function as

remote

either a transmitter or a receiver and is used in

controllers

(0357)

combination either with another WR-1 or a WR-R10 or WR-T10 wireless remote controller. For example, a WR-1 can be connected to the ten-pin remote terminal for use as a receiver, allowing camera settings to be changed or the shutter to be released remotely by another WR-1 acting as a transmitter.

Camera Control Pro 2: Control the camera remotely from a computer to record movies and photographs and save photographs directly to the computer hard disk. When Camera Control Pro 2 is used to capture photographs directly to the computer, the PC connection indicator (c) will appear in the control panel.

Software

Note: Use the latest versions of Nikon software; see the websites listed on page xxii for the latest information on supported operating systems. At default settings, Nikon Message Center 2 will periodically check for updates to Nikon software and firmware while you are logged in to an account on the computer and the computer is connected to the Internet. A message is automatically displayed when an update is found.

Stereo Microphone ME-1: Connect the ME-1 to the camera microphone jack to record stereo sound and reduce the

Microphones chance of picking up equipment noise (such as the sounds produced by the lens during autofocusing;

063).

Availability may vary with country or region. See our website or brochures for the latest information.

441