Using ViewNX 2
Copy Pictures to the Computer
Before proceeding, be sure you have installed the software on the supplied ViewNX 2 CD (0 253).
1Connect the USB cable.
After turning the camera off and ensuring that a memory card is inserted, connect the supplied USB cable as shown and then turn the camera on.
AUse a Reliable Power Source
To ensure that data transfer is not interrupted, be sure the camera battery is fully charged.
AConnecting Cables
Be sure the camera is off when connecting or disconnecting interface cables. Do not use force or attempt to insert the connectors at an angle.
DDuring Transfer
Do not turn the camera off or disconnect the USB cable while transfer is in progress.
257