❚❚No Photograph
The camera will skip the current frame if single-servo autofocus is in effect and the camera is unable to focus (note that the camera focuses again before each shot). Shooting will resume with the next frame.
DTime-Lapse Photography
Time-lapse is not available in live view (0 35, 49), at a shutter speed of Aor &(0 123), when bracketing (0 133), High Dynamic Range (HDR, 0 184), multiple exposure (0 209), or interval timer photography (0 216) is active. Note that because shutter speed and the time needed to record the image to the memory card may vary from shot to shot, the interval between a shot being recorded and the start of the next shot may vary. Shooting will not begin if a time-lapse movie can not be recorded at current settings (for example, if the memory card is full, the interval or shooting time is zero, or the interval is longer than the shooting time).
Time-lapse photography may end if camera controls are used or settings are changed or HDMI cable is connected. A movie will be created from the frames shot to the point where time-lapse photography ended.