Nikon D7000 manual 221

Chapter 8 ■ Setup: Playback and Shooting Menus 221

To copy images from one card to another, just follow these steps (which are available only when two memory cards are present in the camera):

1.Access copy menus. Choose Copy Image(s) from the Playback menu. There are four choices that may be available to you: Select Source; Select Image(s); Select Destination Folder; and Copy Image(s)?.

■If you have images on only one card, all other choices will be grayed out, and the card containing images will be selected. In the Copy Image(s) menu, Select Image(s) will be pre-selected for you, as shown at left in Figure 8.4.

■If there are images on both cards already, you can choose Select Source to spec- ify either Slot 1 or Slot 2 as the source to copy from or you can Select Image(s) if the source displayed is satisfactory.

■If you have already marked some images previously, then all four choices will be available.

2.Select Source or copy. Press the right button on the multi selector to perform the task of your choice:

■Choose Select Source, then highlight Slot 1 or Slot 2 and press OK. (See Figure 8.4, right.)

■Choose Select Image(s) and continue to Step 3.

■Choose Select Destination Folder and continue to Step 3.

■If you’ve chosen source, destination, and images, choose Copy Image(s)? and skip to Step 4.

Figure 8.4 Select images (left), or choose a source slot for the images to be copied (right).